Best Subwoofer Box For Toyota Camry – JL Audio 10″ W3v2-D2 Subwoofer

10 inch JL W3v2-D2 Subwoofer and a woofer box
Volfenhag 2CH Mosfet Bridgeable Power Amplifier (640 watt max)
BRAND NEW 1500 watt complete amplifier hookup kit

KSC-WD250 – Best Subwoofer Box For Toyota Camry

This versatile subwoofer will accept a wide range of input signals, so you can hook it up in almost any system.

The built-in low-pass filter can be set to 50, 80, 100, or 150 Hz using the wired remote control. A built-in low-pass filter adjusts the bass to fit your vehicle, while the phase switch ensures that the sub is working with the speakers in your car, not against them. Kenwood’s KSC-WD250 powered subwoofer combines a 10″ speaker and a 100-watt amplifier into a compact box that won’t take up a lot of space. The box’s ported configuration maximizes the subwoofer’s output, and the amp’s efficient design ensures solid power output without taxing your car’s electrical system.

Details:

* compact powered subwoofer
* 10″ polypropylene woofer in ported enclosure
* Class D 100-watt RMS amplifier (200 watts peak power)
* wired remote control with level control, phase switch, and low-pass filter controls (19-1/2′ cable)
* selectable low-pass filter (50/80/100/150 Hz)
* phase control (0-180 degrees)
* frequency response: 25-1,000 Hz
* preamp- and speaker-level inputs
* wiring harness included (19-1/4′ power/speaker input cable)
* fuse rating: 5A x 2
* 14″W x 13-1/4″H x 14-7/8″D1 x 11-5/8″D2

Best Subwoofer Box For Toyota Camry

It is a 10″ subwoofer in a sealed enclosure for tight bass, as opposed to boomy bass systems heard from passing SUVs. I chose the enclosure intentionally narrow, but wide to maximize trunk space, through using the seat passthrough. This subwoofer may be easily removed if carying substantial amounts in trunk, or of course easily permanently removed. The JL CS110R-W0 PowerWedge system is a Best Subwoofer Box For Toyota Camry to compliment the audio system. You can see that the way the sub fits snugly, it works quite well in the trunk.

* Power Handling: 125W continuous
* Driver one 10W0-4
* Final Impedance 4ohms Mono
* Sealed enclosure
* Rear-firing design

Best Subwoofer Box For Toyota Camry

Sony’s Mobile ES XM-5026 is an excellent amplifier to power the subwoofer with an incredibly noise floor. As you can see from the size, there is a reason that these aren’t installed inside the head unit. The power to the sub is great for a seamless bass addition to the sound. The power to the amplifier is controlled through the head unit, so it does not need to function when not needed. Best Subwoofer Box For Toyota Camry

You can see that the way the amplifier is mounted on the side of the trunk takes nearly no space.

MSRP: $270

• 50W x 2 RMS at 4ohms, 20-20kHz, at 0.04% THD (12V)
• 80W x 2 RMS at 2 or 1ohm, 20-20kHz, at 0.1% THD (12V)
• 1ohm Drive low impedance operation, even at 12V
• 240W at 1ohms, 20-20kHz, at 0.1% THD
• Discrete FET predriver stage
• Discrete final state w/ MOSFET audio devices
• Regulated MOSFET power supply
• Spontaneous Twin Drive
• 40Hz 0 to 12db Low Frequency EQ
• 50/80 Hz selectable 18dB/Octave low pass filter
• 80 Hz selectable 12dB/Octave high pass filter
• Protection for temp, voltage & current faults
• Balanced input circuit for noise isolation
• Cooling fan with DC brushless motor
• Chassis mounted gold plated RCA & screw terminals
• Detachable end caps conceal wiring and connections

Sony Mobile ES 4-Channel Amplifier (originally $380): XM-3046 used for the 4 main speakers with superb quality. The low frequencies are filtered out of the main speakers through a switch. This is used to keep the extremely low bass in the Best Subwoofer Box For Toyota Camry. Sony’s Mobile ES XM-3046 is an excellent amplifier to power the main speakers with an incredibly noise floor. As you can see from the size, there is a reason that these aren’t installed inside the head unit. The RMS power of 30 watts per channel is great for the car. I have only operate the system at above 75% once, to test the system. The power to the amplifier is controlled through the head unit, so it does not need to function when not needed.

You can see that the way the amplifier is mounted on the side of the trunk takes nearly no space.

MSRP: $380

• 30W x 4 RMS at 4ohms, 20-20kHz, at 0.04% THD (12V)
• 45W x 4 RMS at 2 or 1ohm, 20-20kHz, at 0.1% THD (12V)
• 1ohm Drive low impedance operation, even at 12V
• 40W x 2 + 120W at 4ohms, 20-20kHz, at 0.1% THD
• 120W x2 at 4ohms, 20-20kHz at 0.1% THD
• Discrete FET predriver stage
• Discrete final state w/ MOSFET audio devices
• Independendant supply rails for predrive & final stage
• Regulated MOSFET power supply
• 50/80 Hz selectable 18dB/Octave low pass filter
• 80 Hz selectable 12dB/Octave high pass filter
• Protection for temp, voltage & current faults
• Balanced input circuit for noise isolation
• Cooling fan with DC brushless motor
• Chassis mounted gold plated RCA & screw terminals
• Detachable end caps conceal wiring and connections